How to Use Ford F150 Remote Start Feature?

Ford F150 may come with a feature that allows you to start your vehicle remotely and also to regulate the interior temperature according to your chosen settings. This feature is useful especially if you feel tired to step out in the cold to kick-start your vehicle or if you are worried about driving in that vehicle that has been packed in the sun for many hours.

What is a Remote Starter?

A remote starter on an automobile is a unit controlled by a remote. It is usually a part of the key fob that comes with your car when you purchase it. A remote starter is electronically attached to the security system of your car.

Your vehicle starts up when you press a button on your remote start control unit. It starts running with the temperature settings you left the vehicle with. So, if you desire to meet your vehicle in a cool state, make sure you leave the air conditioning on and run.

Whether it is during the humid Alberta summers or the cold Alberta winters, having a remote start system on your car can help you stay comfortable during your drive or before you drive.

Features of a Remote Start

The majority of vehicles that have a remote start already installed in them have some additional features that are also included. The starter is electronically connected to the security system and so.

Other areas of the vehicle like remote trunk release, locking and unlocking of doors, remotely lighting up your dome light, window movement, starter disables, etc., can be remotely controlled as well. How far away you can control the things mentioned above depends on the quality of your vehicle and your remote start.

How Should You Use Your Remote Starter?

When it comes to cooling or heating your vehicle before driving, you have a few options, since you can turn on the vehicle without being inside of it. If your car is parked nearby your house or office, you can make use of your remote to turn on your car 15 minutes earlier before heading out.

To start your car, you don't have to walk out to where it is if it's not too far from where you are. However, you may have to walk to an outside area to start the car if it's a little way away from you. If you are inside your house, you can simply press the start button on the remote from a front window to start the vehicle and then leave whenever you're ready.

Don't start your vehicle while it is parked inside your garage, with the doors (garage doors) closed. Only start when the garage doors are opened so the emissions and carbon monoxide may be able to escape. You must handle your remote starter with care. Make sure you know always when your vehicle is running.

There is a chance that you might have started your car and must have thrown the keys away if you don’t know where the keys are. You can buy a remote start for your Ford F-150 from Amazon here.

How to Use the Ford F150 Remote Start Feature

Before you attempt to start your vehicle remotely, you have to make sure the feature is allowed in the infotainment system settings. The process is as follows:

Proceed to Settings on the center touchscreen.
Select Vehicle Settings.
Select Remote Start Setup.
Switch Remote Start off or on.

Remote Start Your Ford F150

Ford F150 can be remote started easily through a key fob using the procedure below.

Firstly, press the lock button on the remote control to lock all the doors.
On the remote control, press the remote start button within three seconds.
Press the remote start button again within three seconds.
The exterior lamp will flash twice if the command is successful.
The horn will sound if the command is unsuccessful.

Take note of the following:

Most states in the United States have laws against car idling; ensure you check what your provincial or local state laws are before you use the remote start feature.
Remote start can be extended only once.
You are only allowed a maximum of one remote start with an extension or two remote starts. If you want to reset the procedure for restart, switch the vehicle to on and then to off.

Oh, and if you want to learn more about choosing the right engine oil for a car, check out our blog post here.

How Can You Extend the Engine Running Time on Ford F150 Remote Start

Ford F150 remote start feature is an essential feature that can be used to preheat or cool the vehicle before passengers get into it. This feature is also useful for keeping the engine running for a set amount of time.

Before the engine shuts itself off automatically, how can you extend its running time? Continue reading to find out.On the Ford F150, there are presently 3 duration settings you can set your vehicle on.

These duration settings are 5 minutes, 10 minutes, and 15 minutes. The duration can be changed in the instrument cluster. The process for doing this is as follows:

Select Settings on the instrument cluster screen
Move to Advanced Settings.
Scroll to Remote Start.
Select Duration.
Choose between 5 minutes, 10 minutes, and 15 minutes.

While the engine is running, you can repeat the remote starting procedure if you want a duration above 15 minutes. When you do this, the time will be extended by 15 minutes. Note that the engine can be run on remote start for a maximum period of 30 minutes. Also, note that repeating the remote staring procedure will have no effect on your previously set duration settings.

Ford F150 Remote Control Feedback

If equipped, your remote control will provide LED status feedback for a remote stop or start commands. Below is a guide to their meanings:

Blinking green indicates status incomplete.
Solid red indicates remote stop successful.
Blinking red indicates status not received or request failed.
Solid green indicates remote start successfully.

Check out which are the best batteries for Ford F150 here.

Ford F150 Remote Start Troubleshooting

Your Ford F150 remote start system will not work if:

The alarm system is activated.
The ignition is on.
The remote start feature is disabled
The hood is open.
The service engine soon light is on.
The battery voltage is too low.
The transmission is not in the park (P).

Note: Don't make use of remote start when your vehicle is low on fuel.

Ford F150 Climate Control Settings for Remote Start

Adjust the fan speed, thermostat, etc., in the infotainment system to the level you want your F150 to run on when remote starting. Defroster and seat heating can also be turned on. After making these adjustments, you can proceed to activate climate control auto or climate control last settings.

Climate Control Auto Mode

If the auto mode is switched on, the system attempts to cool or heat the interior of the car to 72°F (22°C). To activate the climate control auto mode, use the procedure below.

Go to Settings on the touchscreen.
Choose Vehicle Settings.
Go to Remote Start Setup.
Select Climate Control.
Switch Auto-off or on.

When the ignition is switched on, the climate control system returns to the last settings used.

Climate Control Last Settings

If the last settings are switched on, the system will remember the last used settings. To activate the last settings, use the procedure below.

Go to Settings on the touchscreen.
Select Vehicle Settings.
Choose Remote Start Setup.
Go to Climate Control.
Switch Last Settings off or on.

Heated Seat Settings

If the heated seat settings are switched on, the heated seats will turn on when the weather is cold. To activate heated seats, use the procedure below.

Go to Settings on the touchscreen.
Choose Vehicle Settings.
Go to Remote Start Setup.
Select Seats.
Switch Auto-off or on.

You can learn more on how to use Ford remote start to activate heated seats in this video:

Heated Steering Wheel Settings

If the heated steering wheel settings are switched on, the heated steering wheel will turn on when the weather is cold. To activate the heated steering wheel, use the procedure below.

Go to Settings on the touchscreen.
Choose Vehicle Settings.
Go to Remote Start Setup.
Select Seats and Steering Wheel.
Switch Auto-off or on.

In the fourth step above, you’ll only see “Seats” if your vehicle lacks a heating steering wheel.

How to Remote Stop Ford F150

Ford F150 can also be stopped remotely using the key fob. The procedure for remote stopping is as follows:

On the remote control, press the remote start button.
Press the button again within three seconds.
The exterior lamps will shut off, indicating success.

Final Thoughts

The Ford F150 remote start feature provides great comfort for car owners, especially during cold or hot climates. It allows you to control your car from a distance.

With this feature, you can cool or heat your car from the comfort of your home even before you step into it.We hope you’ve been able to learn a thing or two from this guide on how to use the Ford F150 remote start feature.

‍