Oil change light has an important purpose, and it is there in your Ford F-150 for a reason. To keep your Ford F-150 run smoothly, you will need to check the oil change light to indicate the right time to change the oil. However, one thing to remember is that you will need to reset the oil change light each time you change the oil to indicate you properly.

About Ford F150

Who does not know about Ford? Almost all of us have got some knowledge regarding this top motor company. Ford is undoubtedly one of the most renowned car manufacturing company, and its one of the most popular products is Ford F150.Ford F150 is a top-notch, full-size pickup truck.

The F series of Ford basically produces the best trucks and are in production since 1948. The F series does not only include F-150, but there are various other models as well.In this blog post, we are only going to discuss Ford F150. Keep in mind that there are different generations of Ford F150 trucks.

Therefore, here we will talk about the Twelfth generation (2009-2014) and the Thirteenth generation (2015-2020).We are going to comprehensively discuss how you can reset the oil change light on a ford f150.

Whatever model you have got from the 12th and 13th generations, this blog post will benefit you. We are going to discuss how to reset the oil change light of the ford f150, but we will talk about other lights as well. So let's not wait too much and jump right into our article!

How To Reset The Oil Change Light On a Ford F150

To reset the oil change light on a Ford F-150 is as easy as pie. You may know how to change the oil for your vehicle. Trust us; it is easier to rest the oil change light than to change the oil itself. Literally, there is no rocket science in it. You may be thinking that to reset the oil change light, it is important to be a car freak.

But, let me tell you, there is nothing like that. Therefore, stop getting worried if you see some error in your oil change light. If you have changed the oil recently and still indicate to change the oil, there is no need to get worried about that situation.

All you need to do is rest the oil change light, and you are good to go. Want to buy the premier quality oil filter, click here. If you have got a Ford F150 model from the 12th generation, the following guide is going to be beneficial for you:

Reset The Oil Change Light On a 12th Generation Ford F-150

The 12th generation Ford F-150 trucks are one of the most popular models. They are widely used around the globe due to their amazing features. These trucks were marketed from the year 2009 to 2014.

To rest the oil change light on a Ford F-150 12th generation model, you need to follow a few easy steps. Moreover, it will also depend upon the trim level of your vehicle.

The following methods will help you if your truck is equipped with Trip Button, Display Controls, or a Navigation Button. Before we move on, why buying car floor mats is a good investment. Click here.

Trip Button

If your Ford F-150 truck is equipped with the trip button, you will need to follow the below-mentioned steps.

‍Step 1: Before you start your engine, you will need to switch on the ignition. At this step, you must make sure that your truck completely stops. This will make the process smoother and better.

‍Step 2: At this step, you are required to hold the reset button for a short period. When you do that, your screen will show or indicate a message that will say "HOLD RESET FOR SETUP MENU". If you can not find the button, make sure to check it on the cluster. It will be located there.

‍Step 3: Similar to the previous step, here, you also need to press and hold the reset or the trip button. It would be best if you held it until you enter the menu.

‍Step 4: This is the final step. Here you are required to hold the reset button again but only for 2 seconds. After that, release the button, and the oil life percentage will turn to 100%. That is it; you are good to go!

Navigation Button

To reset the oil change light on a Ford F150, having a navigation button is extremely easy. All you need to do is to follow the step mentioned below:‍

Step 1: First of all, switch your engine to the ON position.

‍Step 2: Then, by using the navigation button, try to find the settings menu. You can select by pressing the OK button.

‍Step 3: Select the option of vehicle. Then again, you need to select the option of Oil Life Reset.

‍Step 4: To turn the oil life percentage to 100 to reset it, you will be required to hold and press the OK button. As soon as it gets to 100%, the job will be done!

Display Controls

If your Ford F-150 12th generation vehicle has display control buttons, you must check the following steps. These simple steps will help you reset the oil change light on a Ford F-150.‍

Step 1: Similar to that of the trip button, here, you also need to switch the ignition before starting the engine.

‍Step 2: Press and hold the setup button for a short time. After you do that, the screen will indicate that “OIL LIFE % HOLD RESET = NEW”.

‍Step 3: At this final step, you need to hold the reset button for just 2 or 3 seconds.

Release it, and your oil life percentage will change to 100%. Job well done! Wasn't that easy? These were the simple and straightforward steps to reset the oil change light on the Ford F-150 12th generation models.

Now, we will proceed towards the steps to reset the oil change light for the 13th generation model. Check out which are the best GPS devices according to our expert opinion here.

Reset The Oil Change Light On a 13th Generation Ford F-150

As you saw from the aforementioned information about how easy it is to reset the oil change light on a 12th generation Ford F-150. Similar is the case with the 13th generation as well. Follow a few simple steps, and you are good to go!The above-mentioned information included three different types of buttons.

We discussed steps for each of the types. However, for the 13th generation, only the navigation button option will be chosen, which makes it further easy. Let's check it out!

‍Step 1: First of all, you need to turn the engine ON.‍

Step 2: At this stage, you will need to press the navigation button. It will help you enter the menu option.

‍Step 3: Here, you will search for settings with the help of the navigation button. To select, you will press, OK.

‍Step 4: Check if you have got the advanced options button. If you do have that, you will press it. Remember that not all f150 have this option.

‍Step 5: Now, you will select the vehicle, and right after that, you will choose the oil life reset.

‍Step 6: Now comes the final stage. Press the OK button for a couple of seconds and release it. The oil life has been reset to 100%.These steps are straightforward to follow. You do not need to learn, such as oil change and related things, to do that. Just keep your model number in your mind and follow the above-mentioned steps.

How To Reset Brake And Engine Check Lights

Along with oil check lights, brake lights and engine check lights are also very important. Let's check out how we can reset them. We will simplify the steps for you so that you can do it without any issue.

How To Reset Brake Lights

Before you can reset the brake lights on your Ford f150, you must check your brake systems. Inspect it to check whether it is fine or not. After you have checked, it is time to reset the brake lights.

First, turn your vehicle on without switching the engine ON. Next, remove the negative cables from the battery for 10 minutes.  As you remove the cables, the system automatically resets, and your job is done.

How To Reset Engine Check Lights

Though the best way to reset the engine check lights in the Ford F-150 is by using an OBD-II scanner, you can follow these easy methods as an alternative as well.

First, you need to inspect for a loose gas cap. If you identify it, make sure to tighten it, and you will notice that the light will disappear. If that does not work, follow another method.

For around 20 to 25 minutes, try to drive your Ford F-150 at a speed of 25mph or above. Then you need to disconnect the positive cables from the battery for about 10 to 20 minutes. Reconnect it, and then start your engine.

If these methods do not work, make sure to take help from a professional mechanic. If you would like to learn more on how to reset check engine lights without a scanner, check out our other blog post here.

Bottom-Line

We hope this article was helpful to you. By following these simple and easy steps, you can reset the oil change light on a Ford F-150 by yourself. It will save you time and money, and you may not need any help from a mechanic.

However, if your vehicle needs some serious maintenance, we will suggest taking it to a mechanic. Taking prompt actions will save your vehicle from serious issues. To read more blog posts about Ford or other car-related topics, stay on our blog and enjoy our content!

‍